Toolbox

GENERAL’S MODEL “E” RODRUNNER® HANDLES LARGE LINES & LONG RUNS WITH POWER & EASE

The Model “E” gasoline powered Rodrunner® drain cleaner from General Pipe Cleaners blends power and maneuverability for rapid removal of clogs in large lines and long runs up to 500 feet down the line.  It’s capable of coupling to either sectional cables to clear up to 14” lines or 5/16” municipal rods to clear lines up to 24” in diameter.

A powerful 6.5 hp engine drives the Model “E” Rodrunner with an easily accessible throttle control on the handle.  Drive speed is set at 100 to 200 rpm for municipal rods and 200 to 400 rpm for sectional cables.

The “Hot-Shift” transmission lets the operator switch from forward to reverse without the need for a clutch.  A long gear shift lever is within easy reach of the operator.

The Model “E” Rodrunner also features a 3/4” lifetime lubricated drive chain and safety slip clutch to protect cables and rods against excessive torque build-up.   Large 12″ pneumatic wheels make it easy to move the machine to and from the job.

For details, contact the Drain Brains® at General Pipe Cleaners at 800-245-6200 or 412-771-6300, or visit www.drainbrain.com/jets.

Milwaukee Tool continues to expand their Lighting Solutions with the introduction of the M18 ROVER™ Mounting Flood Light. Designed for trades that are constantly on the move, the new light features a 2” spring-loaded clamp and powerful magnets that allow users to turn virtually any jobsite surface into a hanging surface and illuminate whatever they need to with its rotating, folding head.

“By leveraging our leadership in cordless and LED technology, we’ve been able to provide flood lighting solutions that deliver on the durability, performance, and portability that halogen lights have historically failed to achieve,” said Jason Isaacs, Product Manager for Milwaukee Tool. “Not only does the new M18 ROVER™ Mounting Flood Light build on this offering by replacing halogen work lights, it’s also the most versatile flood light to-date. Adaptable to almost any lighting situation through its rotating light head design, integrated magnets and a tool-free mounting mechanism also allow it to mount to any surface, on any site, for any task.”

The rotating, folding head of the M18 ROVER™ Mounting Flood Light quickly directs light to where it is needed most without moving the light itself. A magnetic base allows users to stick the Flood Light to metal surfaces such as steel studs, electrical boxes, ductwork, and job boxes with a holding strength of over 25 lbs. A 2” spring- loaded reinforced clamp makes it quick and easy to mount to other common surfaces like work carts, wood studs, scissor lifts, ladders, and more. This larger capacity clap also allows it to fit over doors, rough-in lumber, and larger piping. With the ability to rest in 5 different positions, it can also direct light in multiple directions and angles.

Capable of providing up to 1500 lumens of light, the new M18 ROVER™ Mounting Flood Light can illuminate large workspaces for up to 20 hours on a single charge. The Flood Light features TRUEVIEW™ Technology, which utilizes the most advanced LED technology and optical designs to deliver a consistent beam, optimized color temperature, and true representation of colors and detail leading to a more productive work area.

A durable high impact polycarbonate lens design can survive harsh jobsite conditions and, when paired with the Flood Light’s rubber over mold, can survive 9’ drops. Additionally, with an IP54 rating, the Flood Light is protected from dust and water. Similar to all of Milwaukee’s high output LED lights, the new Flood Light also features a limited lifetime LED warranty, and a 5-year warranty on the product.

For added utility, a handle/tie-off zone allows it to be easily carried or tethered while use on a scissor lift.

Milwaukee is committed to improving productivity by providing performance-driven and trade-focused solutions so users can perform an entire day’s work on one battery system. This new tool is fully compatible with the entire M18™ line, now offering more than 150 power tool solutions. Through their continued investments in game-changing technology, Milwaukee will remain relentless in the design and development of lighting solutions with the ability to adapt, perform and survive the demands of professional use.

*batteries sold separately. 

Specifications

M18 ROVER™ Mounting Flood Light (2365-20) Coming November 2017

1500 Lumens on high (4.5 hours of run-time)*

• or 7 hours**

650 Lumens on Medium (10 hours of run-time)*

• or 15.5 hours**

300 Lumens on Low (20 hours of run-time)*

• or 31.5 hours**

3.62 lbs

*Run-times based off use with an M18™ REDLITHIUM™ XC5.0 Battery Pack

**Run-times based off use with an M18™ REDLITHIUM™ HIGH DEMAND™ 9.0 Battery Pack

The Bosch Custom Case System for Impact Tough™ bits offers better organization and customization features for trade professionals who demand best-in-class products that help them get the job done right.

The durable case provides tilt-in/tilt-out convenience for easy access to bits. This customizable organization system helps users increase productivity by reducing time spent searching for bits. Users also can take only the bits needed for a given job rather than the whole case because the Bosch Custom Case System has removable bit clips. The innovative system allows users to customize set configurations so they can make a set that fits the job and their specific requirements.

The Bosch Custom Case accommodates Bosch Impact Tough screw driver bits that deliver 10x the life versus standard impact bits. Impact Tough screw driver bits have an Xtended Torsion Zone to absorb torque peaks to reduce stress and breakage, and are engineered to accommodate today’s high-torque impact drivers. Torque stress at the impact point of the tip is transferred to the tension dissipation zone to ensure longer life. Bosch Impact Tough™ screw driver bits are precision machined for better fit in the tool and better fit delivers more torque to the bit, reduces slippage and contributes to bit life. Better fit in the tool delivers less breakage and better performance.

The Bosch Custom Case can be used with Bosch Impact Tough black oxide drill bits as well. Bosch black oxide bits offer superior durability, speed and can be used for a variety of general purpose drilling applications. These bits offer quality drilling in everything from metal and wood to plastic and composite materials.

Milwaukee Tool continues to expand their Storage Solutions with the introduction of the Jobsite Cooler. Designed from the ground-up to withstand the harshest jobsite conditions, the cooler utilizes twice the insulation of other similar coolers on the market and a food-grade leak-proof liner that holds ice for 24 hours.

Coolers are one of the most frequently seen storage units brought to the jobsite every day, but the options currently available do not provide the duration of cooling needed to maintain ice for an entire day, nor are they built with the durability to survive tough use. Constructed with a weather-resistant 1680D Ballistic Material base and rugged metal zippers for extreme durability, the new Jobsite Cooler is Milwaukee’s answer to these frustrations.

Sized to accommodate ice, frozen water bottles, and/or cooling packs,* the Jobsite Cooler features a leak-proof liner and 2X the insulation of other coolers on the market to keep these items cold for 24 hours – ensuring users that their drinks and food will remain cool throughout the day.

To accommodate various storage needs, the Jobsite Cooler is also designed with multiple pockets to hold personal items and medical supplies, separate from the main compartment. A tech pocket on the front of the cooler is ideal for tablets, cell phones, timesheets, and more. Within the cooler, a dry storage compartment (or sandwich pocket) provides an ideal location for food that needs to remain cool yet dry.

At approximately 11”x14.9”x13.8”, the Jobsite Cooler is wide enough to store common plastic food containers and tall enough to hold 32oz sports drinks. Its small profile also makes it easy to store in common locations such as the backseat of a truck, in a tool box, on a cart, or on the floorboard of a car. A padded shoulder strap provides a comfortable way for users to transport the Cooler to and from the jobsite.

For added utility, a tape measure clip also doubles as a bottle opener for ultimate versatility.

Part of a growing line of storage solutions from Milwaukee, the new Jobsite Cooler will be available in October of 2017. Dedicated to delivering enhanced solutions to increase productivity, Milwaukee’s storage category will continue to grow and offer user-driven innovative solutions for the trades.

*Capable of holding nearly 21.65 liquid qts

For more information on the full line of Milwaukee® products, call 1-800-SAWDUST or visit www.milwaukeetool.com