Taco Comfort Solutions® has expanded their family of easy to use, high-efficiency ECM circulators with the addition of the 0034e™ and 0034ePlus™ models. With a maximum of 34 feet of head and 50 gpm, the new circulators offer up to 85% energy savings over a conventional circulator. These circulators are available with cast iron or Read more
Products
Taco Comfort Solutions® has expanded their family of easy to use, high-efficiency ECM circulators with the addition of the 0034e™ and 0034ePlus™ models. With a maximum of 34 feet of head and 50 gpm, the new circulators offer up to 85% energy savings over a conventional circulator.
These circulators are available with cast iron or NSF/ANSI 61 & 372 certified stainless steel volutes, so they are ideal for closed-loop heating systems as well as domestic hot water recirculation systems. Both circulators also offer a convenient, rotatable control box cover for a professional look, no matter the orientation of the installed circulator.
The 0034e features an easy-to-use dial with five operating modes, including constant pressure, fixed speed, Taco’s exclusive activeADAPT™ self-adjusting proportional pressure, and 0-10V capability. The 0034ePlus adds proportional pressure and more constant pressure settings as well as a digital display with real-time feedback, including watts, GPM, feet of head, and RPM. Both circulators are dual-voltage 115V/230V.
Both new circulators come with exclusive features that make Taco’s ECM high-efficiency circulators so easy to use, including SureStart® automatic unblocking and air purging, BIO Barrier® black iron oxide protection, dual electrical knockouts, six-inch stranded leads, recessed flange nut-grabbers and double insulation so no ground wire is needed.
For more information, visit www.TacoComfort.com
e-HME and e-SVE Smart Pumps deliver greater efficiency and optimal performance Goulds Water Technology, a Xylem brand, recently launched the e-HME and e-SVE pumps with integrated and Variable Speed Control and intelligence. These are easy-to-install variable speed systems that combine a state-of-the-art hydraulic pump with permanent magnet motor technology and a variable speed drive to Read more
e-HME and e-SVE Smart Pumps deliver greater efficiency and optimal performance
Goulds Water Technology, a Xylem brand, recently launched the e-HME and e-SVE pumps with integrated and Variable Speed Control and intelligence. These are easy-to-install variable speed systems that combine a state-of-the-art hydraulic pump with permanent magnet motor technology and a variable speed drive to provide up to 70 percent energy savings in residential and agricultural applications.
“Installers need the right combination of motor, drive and hydraulic pump in a turnkey package for applications such as pressure boosting and irrigation, said Stephen Clark, Xylem product line manager, monitoring and controls, applied water systems. “Our e-HME and e-SVE ranges are truly smart pumps that deliver high performance and optimize energy use right out of the box.”
Xylem 102 Smart range, e-SM drive
Goulds Water Technology e-HME and e-SVE pumps are pre-programmed for quick installation, and have stainless steel casing and inner components for minimal noise levels and long service life. The products are certified to the NSF/ANSI 61 Drinking Water System Components standard to deliver safe, quality potable water, and are rated NEMA 3R for outdoor installation.
The IE5 ultra-premium permanent magnet motor operates single or multi-pump systems of up to three pumps without an external control panel or programmable logic controller. Quickly install a system by adding power and plumbing, press start and the system is ready to perform– No external drive or controller is required.
The e-HME is available in five models and delivers up to 130 GPM and 540 feet TDH. The e-SVE is available in six models with multiple construction design, and delivers up to 85 GPM and 710 feet TDH. Both product lines are available in 0.5 – 2 HP.
For more information about the e-HME and/or e-SVE Smart Pump ranges, visit the product page on the Goulds Water Technology website.
Savvy professionals call it the dependable way to preserve and protect sewer cables from rust. Now original Snake-Oil™ from General Pipe Cleaners is back! Now called Snake-Oil Classic™, it’s better than common lubricants. General’s special rust inhibitor cuts through moisture – and replaces it with a rust resistant coating. Sewer cables and machines – including Read more
Savvy professionals call it the dependable way to preserve and protect sewer cables from rust. Now original Snake-Oil™ from General Pipe Cleaners is back!
Now called Snake-Oil Classic™, it’s better than common lubricants. General’s special rust inhibitor cuts through moisture – and replaces it with a rust resistant coating.
Sewer cables and machines – including drums, bearings and power cable feeds – enjoy significantly extended life. And General’s deodorant gives everything a fresh, clean smell.
It’s easy to use, too. Just pour a quantity of Snake-Oil Classic into your machine’s cable drum – and rotate the container, letting the oil contact as much of the cable as possible. Then drain off excess Snake-Oil Classic – and allow the cable to air-dry.
Snake-Oil Classic joins Snake-Oil Plus™, General’s new non-toxic, biodegradable addition to its Snake-Oil family. Snake-Oil Plus creates a virtually non-stick surface that keeps mud and debris from adhering to cables and equipment – extending the life of both.
Snake-Oil Classic is available in either quarts or gallons (New part # SOC-Q or SOC-G.)
For additional information, contact the Drain Brains® at General Pipe Cleaners at 800-245-6200 or 412-771-6300, or visit www.drainbrain.com.
Taco Comfort Solutions’ Near-Boiler Trim Kit provides a quick and convenient way to purchase all the accessories needed for near-boiler piping. The Near-Boiler Trim Kit comes in premium, advanced and select configurations, and is available in 1” and 1-1/4” sizes so installers can select the kit that fits their needs. All versions of the kit Read more
Taco Comfort Solutions’ Near-Boiler Trim Kit provides a quick and convenient way to purchase all the accessories needed for near-boiler piping.
The Near-Boiler Trim Kit comes in premium, advanced and select configurations, and is available in 1” and 1-1/4” sizes so installers can select the kit that fits their needs. All versions of the kit include air separators, boiler feed and backflow preventer, 4.5-gallon expansion tanks, and all fittings and connections.
The trim kits are designed for easy installation and are ASSE listed.
For more information, visit www.TacoComfort.com
Bradley Corp., industry-leading manufacturer of lead-free valves and tepid water delivery solutions, introduces its newest Navigator® Thermostatic Mixing Valve. Engineered to deliver safe water temperatures to both commercial faucet applications as well as emergency safety eyewash fixtures, this model provides a complete and efficient single mixing valve solution. With its innovative combination of two valves Read more
Bradley Corp., industry-leading manufacturer of lead-free valves and tepid water delivery solutions, introduces its newest Navigator® Thermostatic Mixing Valve. Engineered to deliver safe water temperatures to both commercial faucet applications as well as emergency safety eyewash fixtures, this model provides a complete and efficient single mixing valve solution.
With its innovative combination of two valves in one, the Navigator TMV saves on installation time and conserves space under sinks. During regular faucet use, the TMV delivers tempered water for uses such as hand washing; in an emergency, the valve delivers tepid water to the emergency safety eyewash to meet the ANSI/ISEA Z358.1 standard for the required 15-minute flush.
This new Navigator TMV is ASSE 1070 and 1071 Certified, and includes a 3/8″ compression fitting to faucet. A reliable liquid-filled thermostat ensures safe water temperature to the eyewash, and a separate wax filled thermostat delivers safe water temperature to the faucet.
With its built-in safety features, the cold water bypass on the eyewash assures cold flow if hot water fails. Navigator TMV also offers anti-scald protection with positive shutoff of hot supply when cold supply is lost.
Designed for reliable precision, Navigator TMVs deliver accurate temperature control to within ± 3° and features an adjustable set point within temperature range.
Ready for easy direct mounting to walls, all materials are 100% factory assembled and tested.
For more information, please visit https://www.bradleycorp.com/navigatorvalves.
For almost 100 years, Bradley has created the most complete and advanced commercial washrooms and comprehensive solutions that make industrial environments safe. Bradley is the industry’s leading source for multi-function hand washing and drying fixtures, accessories, partitions, solid plastic lockers, as well as emergency safety fixtures and electric tankless heaters for industrial applications. Headquartered in Menomonee Falls, Wis., USA, Bradley serves commercial, institutional and industrial building markets worldwide. For more information visit https://www.bradleycorp.com.