Water has long been used as a means for dust control in the professional construction industry. But what do you do when a pressurized water source is hard to come by? You bring the Hilti integrated water pump DSH-P to the job. The Hilti integrated water pump DSH-P is the first of its kind in Read more
Toolbox
Water has long been used as a means for dust control in the professional construction industry. But what do you do when a pressurized water source is hard to come by? You bring the Hilti integrated water pump DSH-P to the job.
The Hilti integrated water pump DSH-P is the first of its kind in the industry and provides unparalleled dust control portability. No more being limited by distance. Simply fill-up a bucket of water or use another static water source and attach a DSH-P integrated water pump system to your Hilti gas-powered handheld saw to control dust on your jobsite.
The Hilti integrated water pump DSH-P leverages the power of your Hilti gas saw to produce pressurized water and reduce airborne dust, wherever the jobsite may be. The Hilti integrated water pump comes with 10 feet of hose and is compatible with Hilti gas-powered DSH 700-X and 900-X handheld saws.
Like Hilti gas saws, the Hilti integrated water pump DSH-P is available as a Hilti fleet item which provides a 1-year, no questions asked, repair coverage period; and a guaranteed 1-day turn-around on repairs.*
For more information on Hilti gas saws and integrated water pump, please contact Hilti Customer Service. From the U.S., call Hilti, Inc., at 1-800-879-8000 or visit www.hilti.com; from Canada, call Hilti (Canada) Corporation at 1-800-363-4458 or visit www.hilti.ca.
Designed specifically for one-handed use, the RIDGID® PEX-One™ 12V Battery PEX Tool presses a half inch through one inch PEX tubing. It is 16.5 inches long and weighs 5.8 pounds, including battery and dies, which is over 25 percent lighter than other battery-powered PEX tools. Ideal for overhead connections and accessing tight spaces, the PEX-One Read more
Designed specifically for one-handed use, the RIDGID® PEX-One™ 12V Battery PEX Tool presses a half inch through one inch PEX tubing. It is 16.5 inches long and weighs 5.8 pounds, including battery and dies, which is over 25 percent lighter than other battery-powered PEX tools. Ideal for overhead connections and accessing tight spaces, the PEX-One provides full power through 150+ presses per charge with a 5-second crimp cycle. It has interchangeable dies with a quick change system and is compatible with ASTM F1807 copper crimp ring fittings and Viega® PureFlowTM fittings. PEX-One also features a LED-light for no or low-light environments and is powered with a 12V Advanced Lithium 2.5 battery. The compact design and ability to press multiple sizes allows contractors to easily get rid of their manual press tools, freeing up space in their tool belt and tool box. It has a 12,000 service cycle interval.
For more information on this tool visit RIDGID at https://www.ridgid.com/us/en/pressing-pexone
Delivering ultimate versatility and access, the new 12pc Ratchet and Socket Set features a ratchet with pivoting head that can be used as a ratchet, nut driver, and any angle in between. New proprietary sockets feature a parallel flat design for wrench compatibility and to deter rolling, as well as an optimized geometry to reduce Read more
Delivering ultimate versatility and access, the new 12pc Ratchet and Socket Set features a ratchet with pivoting head that can be used as a ratchet, nut driver, and any angle in between. New proprietary sockets feature a parallel flat design for wrench compatibility and to deter rolling, as well as an optimized geometry to reduce stripping and breaking. Because socket sizes can often be hard to see on chrome and can fade more quickly when laser etched, socket sizes are hard-stamped into 2 flats of the socket for readability from multiple angles.
For more information visit https://www.milwaukeetool.com/hand-tools/fastening/48-22-9000
GENERAL’S MODEL “E” RODRUNNER® HANDLES LARGE LINES & LONG RUNS WITH POWER & EASE The Model “E” gasoline powered Rodrunner® drain cleaner from General Pipe Cleaners blends power and maneuverability for rapid removal of clogs in large lines and long runs up to 500 feet down the line. It’s capable of coupling to either sectional cables Read more
GENERAL’S MODEL “E” RODRUNNER® HANDLES LARGE LINES & LONG RUNS WITH POWER & EASE
The Model “E” gasoline powered Rodrunner® drain cleaner from General Pipe Cleaners blends power and maneuverability for rapid removal of clogs in large lines and long runs up to 500 feet down the line. It’s capable of coupling to either sectional cables to clear up to 14” lines or 5/16” municipal rods to clear lines up to 24” in diameter.
A powerful 6.5 hp engine drives the Model “E” Rodrunner with an easily accessible throttle control on the handle. Drive speed is set at 100 to 200 rpm for municipal rods and 200 to 400 rpm for sectional cables.
The “Hot-Shift” transmission lets the operator switch from forward to reverse without the need for a clutch. A long gear shift lever is within easy reach of the operator.
The Model “E” Rodrunner also features a 3/4” lifetime lubricated drive chain and safety slip clutch to protect cables and rods against excessive torque build-up. Large 12″ pneumatic wheels make it easy to move the machine to and from the job.
For details, contact the Drain Brains® at General Pipe Cleaners at 800-245-6200 or 412-771-6300, or visit www.drainbrain.com/jets.
Milwaukee Tool continues to expand their Lighting Solutions with the introduction of the M18 ROVER™ Mounting Flood Light. Designed for trades that are constantly on the move, the new light features a 2” spring-loaded clamp and powerful magnets that allow users to turn virtually any jobsite surface into a hanging surface and illuminate whatever they Read more
Milwaukee Tool continues to expand their Lighting Solutions with the introduction of the M18 ROVER™ Mounting Flood Light. Designed for trades that are constantly on the move, the new light features a 2” spring-loaded clamp and powerful magnets that allow users to turn virtually any jobsite surface into a hanging surface and illuminate whatever they need to with its rotating, folding head.
“By leveraging our leadership in cordless and LED technology, we’ve been able to provide flood lighting solutions that deliver on the durability, performance, and portability that halogen lights have historically failed to achieve,” said Jason Isaacs, Product Manager for Milwaukee Tool. “Not only does the new M18 ROVER™ Mounting Flood Light build on this offering by replacing halogen work lights, it’s also the most versatile flood light to-date. Adaptable to almost any lighting situation through its rotating light head design, integrated magnets and a tool-free mounting mechanism also allow it to mount to any surface, on any site, for any task.”
The rotating, folding head of the M18 ROVER™ Mounting Flood Light quickly directs light to where it is needed most without moving the light itself. A magnetic base allows users to stick the Flood Light to metal surfaces such as steel studs, electrical boxes, ductwork, and job boxes with a holding strength of over 25 lbs. A 2” spring- loaded reinforced clamp makes it quick and easy to mount to other common surfaces like work carts, wood studs, scissor lifts, ladders, and more. This larger capacity clap also allows it to fit over doors, rough-in lumber, and larger piping. With the ability to rest in 5 different positions, it can also direct light in multiple directions and angles.
Capable of providing up to 1500 lumens of light, the new M18 ROVER™ Mounting Flood Light can illuminate large workspaces for up to 20 hours on a single charge. The Flood Light features TRUEVIEW™ Technology, which utilizes the most advanced LED technology and optical designs to deliver a consistent beam, optimized color temperature, and true representation of colors and detail leading to a more productive work area.
A durable high impact polycarbonate lens design can survive harsh jobsite conditions and, when paired with the Flood Light’s rubber over mold, can survive 9’ drops. Additionally, with an IP54 rating, the Flood Light is protected from dust and water. Similar to all of Milwaukee’s high output LED lights, the new Flood Light also features a limited lifetime LED warranty, and a 5-year warranty on the product.
For added utility, a handle/tie-off zone allows it to be easily carried or tethered while use on a scissor lift.
Milwaukee is committed to improving productivity by providing performance-driven and trade-focused solutions so users can perform an entire day’s work on one battery system. This new tool is fully compatible with the entire M18™ line, now offering more than 150 power tool solutions. Through their continued investments in game-changing technology, Milwaukee will remain relentless in the design and development of lighting solutions with the ability to adapt, perform and survive the demands of professional use.
*batteries sold separately.
Specifications
M18 ROVER™ Mounting Flood Light (2365-20) Coming November 2017
1500 Lumens on high (4.5 hours of run-time)*
- or 7 hours**
650 Lumens on Medium (10 hours of run-time)*
- or 15.5 hours**
300 Lumens on Low (20 hours of run-time)*
- or 31.5 hours**
3.62 lbs
*Run-times based off use with an M18™ REDLITHIUM™ XC5.0 Battery Pack
**Run-times based off use with an M18™ REDLITHIUM™ HIGH DEMAND™ 9.0 Battery Pack