Parallel variable speed constant pressure pumps answer at non-profit agency

 

This story has to do with a lot of people doing the wrong thing at different points in time, and the waste and consequences, and eventual satisfactory resolution to the problem.

The story begins back in the late 1960s. A young, first-year engineer was given the task of designing the hydronic heating system for a Catholic Outreach facility that housed employees who worked to help the homeless find homes, employment and other resources—to help them get through rough times. The young M.E. in training had performed the calculation required to not only provide heat to the administrative offices, but also provide DHW through two indirect heaters. Being his first commercial job, he didn’t want to ever get a call from the end users telling him that the system was insufficient, so as he was adding up the thermal load flow requirements, he was also adding up the required feet of head. He was confused, and thought that the feet head required to overcome the thermal loads, was accumulative. He chose a circulator that could match the accumulative GPM requirements, as well as the accumulative feet of head. This was the first of many mistakes made by many people.

Screen Shot 2014-10-27 at 1.56.43 PM

Fast forward to 2010. The building was a candidate for an energy upgrade that was to be financed by a division of the federal government, tasked with distributing funds to low income and non-profit organizations. The local non-profit organization charged with the final distribution of funds had hired a local energy conservation consultant to assist in the preparation of bid documents to allow local heating contractors to bid on a level playing field. Essentially, they went in and documented the existing equipment, and prepared a bid document asking the bidding contractors to replace the existing equipment, with higher efficiency equipment. Mistake number 2.

The local contractors bid their work based on the information provided by the conservation consultant. The general thought was, that due to the fact that it was originally an engineered system, it has to be right. Mistake number 3.

The recipient of the bid decided that he would match equipment, spec for spec, but use state-of-the-art equipment with higher efficiencies. He replaced the 3-phase circulator with a circulator of similar performance characteristic, but a more efficient 3-phase motor. He replaced the existing cast iron fire-breathing dragon with two modulating condensing boilers. Mistake number 4.

Shortly after the replacement with the high efficiency pump and boilers, the occupants of the building began complaining of over heating in the administrative building. The nun in charge of the operations complained to the installing contractor. The installing contractor pointed the finger of blame at the conservation consultant who determined the equipment needs. The consultant pointed his finger at the blueprints that they were given, which resulted in the selection of the replacement equipment. The plans had an engineer’s stamp on them, so they had to be correct, right? Mistakes 5,6 and 7.

Somehow, the electrical contractor got involved, and even he stated that due to the fact that 208-volt, 3-phase power was provided, that he had to use the 3-phase pump provided by the heating contractor. Mistake number 8.

The poor nun had given up all hope of ever getting the problem resolved, and took matters into her own hands, and began opening and closing ball valves serving the baseboard convectors in the administrative offices. When she was gone, her assistant took over and handled the daily task of opening and closing valves in an effort to maintain comfort conditions.

Enter a forensic hydronic heating expert. His specialty was taking other peoples seemingly impossible to resolve problems, and solve them.

He performed a reverse engineering program, and checked the convectors against the square footage of building served, and determined that they were slightly oversized, which is good when you are utilizing a modulating/condensing appliance. He calculated the other connected loads and determined the highest pressure drop to be serviced by the pump. The individual space heating zones located throughout the administrative building are controlled by a conventional Honeywell zone valve, which has a“close off against” pressure of 8 PSI, or 18 feet of head. The space heating circulator is capable of generating 35 feet of head at its mid curve point, and almost 50 feet of head in a no flow condition (dead head).

There are no piping bypasses nor pressure-activated bypasses in the hydronic distribution piping network. The zone valves are consequently bypassing, causing significant overheating of the offices in the building.

The main space heating pump is consuming 2,992 watts per hour, and is running 24 hours per day, 365 days per year for a total of approximately 26,218 KWH’s per year. At $0.10 per KWH, this results in an annual electrical cost of $2,621.00.

The pump was replaced with two Grundfos ALPHA pumps piped in parallel reverse return. Their maximum energy consumption was seen at 43 watts each, for a total of 86 watts, peak. Based on the above calculated run times, the annual energy consumption of the two parallel Alphas would be 86 * 24 * 365 for a total of 753 kilowatt hours per year. At $0.10 this will cost $75.33 per year, resulting in an annual savings of $2,546 per year. This is money that can and will go towards feeding and clothing the homeless. None of these calculations takes into consideration the reduction in KW demand charges from the local electrical utility, or the reduction in waste associated with over heating spaces at night when the manual ball valves were left open.

The moral of the story is this. If someone, especially a 75-year-old nun complains about the comfort conditions in a given space, trust her. She’s not telling a fib. NEVER EVER take a system for granted just because a blueprint has an engineer’s stamp on it; it doesn’t really mean it was done right.

Think outside of the box, and don’t be afraid to try something that would work, but isn’t the norm (parallel variable speed constant pressure pumps).

Many thanks to the good folks of Grundfos, who donated their product to this excellent non-profit agency, and showed how to conserve pumping energy, and increase human comfort.

By the way, the Nun has joined a local health club because she is no longer running around, stooping down, closing valves and standing up and running to the next zone.

Leave a Reply

Your email address will not be published. Required fields are marked *

Selecting the Proper Balancing Valve

Today’s designers have a wide variety of balancing valve technologies to select from: static, dynamic and thermal, for example. Mark Olson, GM, reviews how the various designs differ and discusses their applications and comparative trade-offs. He uses cutaways, schematics and actual installation photos to provide a thorough summary of options available in today’s market. You’ll … Continue reading Selecting the Proper Balancing Valve

25 Quick Tips for Working in Small Mechanical Spaces

Most of you have been there. Looking up to the heavens with outstretched arms, you exclaim loudly, “Why?!” I’m talking about working in the smallest mechanical rooms known to mankind. How does one navigate them to work efficiently? I asked some contractors and here are some quick tips: Have scene safety. Know your surroundings. Check … Continue reading 25 Quick Tips for Working in Small Mechanical Spaces

Introducing BEST: The Building Efficiency System Tool™ Powered by BEER

A diverse group of commercial manufacturers from the United States, Mexico, and Canada — supported by IAPMO and members of the Hydronics Industry Alliance, a Committee of the Radiant Professionals Alliance (RPA) — has taken on the challenge of delivering a total commercial building HVAC system efficiency comparison tool that is now available online at … Continue reading Introducing BEST: The Building Efficiency System Tool™ Powered by BEER

Continuing demand for energy efficient systems heats up HVAC market

As the construction industry moves toward the 2030 goal of net zero energy buildings — buildings that produce as much renewable energy as they consume on an annual basis — HVAC system design is at the forefront of these efforts. This is especially true for commercial buildings. Given that a standard HVAC system represents 40 … Continue reading Continuing demand for energy efficient systems heats up HVAC market

Hydronic systems are the natural choice

Making the case for hydronics: three advantages of water-based HVAC systems over VRF In an ongoing effort to meet the comfort, cost and energy-efficiency expectations of the commercial building industry, design engineers, building owners and mechanical contractors are constantly re-examining the technology and components of HVAC systems.   Hydronic systems and variable refrigerant flow (VRF) … Continue reading Hydronic systems are the natural choice

Radiant heating & cooling at UCLA’s Wasserman Eye Research Center takes a load off

The Wasserman Eye Research Center is a culmination of a 50-year vision to house a world-class research and care center on the UCLA campus to preserve and restore eyesight. With offices in New York and Los Angeles, renowned architectural firm Richard Meier & Partners Architects designed the six-story, 100,000-square-foot Edie and Lew Wasserman building. Completed … Continue reading Radiant heating & cooling at UCLA’s Wasserman Eye Research Center takes a load off

ProPEX® EP opposing-port tees reduce fittings by 75%, connections by 60%

Here’s a solution that makes sense in back-to-back hydronic piping applications. Uponor’s ProPEX® engineered polymer (EP) opposing-port tees eliminate the need for additional tees, elbows and piping to facilitate connections for back-to back terminal units, reducing the number of required fittings by 75% and the number of required connections by 60%. In traditional installations, you … Continue reading ProPEX® EP opposing-port tees reduce fittings by 75%, connections by 60%

REHAU wins Plastics Pipe Institute’s Building and Construction Division Project of the Year award

Irving, Tex. — The Plastic Pipe, Inc. (PPI) announced that REHAU has been awarded the PPI Building & Construction Division Project of the Year. The University of Chicago Residence Hall and Dinning Commons used 300,000 feet of REHAU PEX pipe for the hydronic radiant heating and cooling systems in three building that make up with … Continue reading REHAU wins Plastics Pipe Institute’s Building and Construction Division Project of the Year award

Solar Thermal at Logan International’s Terminal E

Known as the “Crescent,” the 95,000-sq.-ft. addition to Boston International Airport’s Terminal E—which serves all international arrivals and most international departures—adds three new gates, each with two parallel jetways to accommodate boarding at both levels of an A380 aircraft, or front and rear exits of other aircraft. Without these larger boarding gates, the economic viability … Continue reading Solar Thermal at Logan International’s Terminal E

Take a look at PEX for hydronic piping systems

It’s well-known that copper (2″ and down) has dominated the hydronic heating and cooling market for decades. However, with the need to value engineer projects and still ensure high quality while staying on schedule, professionals in the industry are looking to new materials for solutions to improve profitability, increase system performance and meet the tight … Continue reading Take a look at PEX for hydronic piping systems

Maintaining High Fluid Quality in Modern Hydronic Systems (Part 2)

Our complimentary educational series, Coffee with Caleffi™, is an online technical training webinar and is intended for contractors, designers and wholesalers. What’s next? Maintaining High Fluid Quality in Modern Hydronic Systems (Part 2) Thursday, April 27 12 noon – 1:00pm CDT Fluid problems can cause loss of efficiency, comfort fall-off and/or premature equipment failure. This … Continue reading Maintaining High Fluid Quality in Modern Hydronic Systems (Part 2)

High efficiency boilers earn high grades at Iowa college campus

A failing steam heating system posed many issues and challenges for facility services at Cornell College in Mount Vernon, Iowa. Retrofitting campus buildings with high efficiency condensing boilers from Weil-McLain provided the solution needed for improved, head-of-the-class heating at the school. Cornell College was founded in 1853 by George Bryant Bowman, a minister from North … Continue reading High efficiency boilers earn high grades at Iowa college campus

U.S. Bank Stadium’s heating and cooling powered by innovative pumping system

U.S. Bank Stadium, the largest public works project in Minnesota history, is not just a multipurpose stadium in Minneapolis—it’s a work of art. Built on the site of the former Metrodome, the $1.1 billion stadium is nearly twice the size as the National Football League’s Minnesota Vikings’ old home, and is praised not only for … Continue reading U.S. Bank Stadium’s heating and cooling powered by innovative pumping system

Taco facility approved through Hydraulic Institute’s Pump Test Lab Approval Program

The Hydraulic Institute announced that Taco Comfort Solutions’ pump test laboratory in Cranston, RI recently received approval through HI’s Pump Test Lab Approval Program. The HI program assists pump OEMs and other pump test laboratories improve their current laboratory procedures and policies by working with an experienced third-party auditor to develop and maintain accurate, uniform, … Continue reading Taco facility approved through Hydraulic Institute’s Pump Test Lab Approval Program

Viega ProRadiant Insulated PEX Barrier Piping System for snowmelt

Viega introduced its ProRadiant™ Insulated PEX Barrier Piping System for its snow melting system. The piping system is ideal for applications including helipads, loading docks, parking garages and stairs.   The Insulated PEX Barrier Piping System’s superior insulation results in a reduction in heat loss over competitive products in the market. The system’s high-compressive strength … Continue reading Viega ProRadiant Insulated PEX Barrier Piping System for snowmelt

Hydronics installation drives home energy savings

The owner of a 2,800-sq.-ft. home in New Milford, Penn., was experiencing uneven heat throughout the residence, limited hot water and high utility costs. The installation of a new hydronic heating system helped drive home significant energy savings and ensure that “no place like home” feeling. Kirk Walthers, owner of the two-story residence on Main … Continue reading Hydronics installation drives home energy savings

ACV Triangle Tube invests in future with new manufacturing facility

With an increasing demand for high quality, energy efficient heating products, ACV Triangle Tube is announced that they have invested in a new, state-of-the-art production facility.   Designed to streamline the manufacturing process and to produce goods at a higher capacity, this new facility utilizes a completely automated robotics line. This sophisticated production process employs … Continue reading ACV Triangle Tube invests in future with new manufacturing facility

New Uponor wireless control offers efficiencies for radiant systems

Uponor North America (Uponor) announced the next generation in wireless controls for residential hydronic radiant floor heating systems. The new Climate Control Zoning System II features an innovative technology called Autobalancing that boasts 25% faster reaction times and up to 20% greater energy savings for radiant floor heating systems. The new Autobalancing technology in the … Continue reading New Uponor wireless control offers efficiencies for radiant systems

Pennsylvania Contractor Transforms Tobacco Barn Into Energy-Efficient Wedding Venue

Because of its proximity to East Coast population centers, the Amish Country of Pennsylvania has become a wedding destination for out-of-towners. Lancaster County’s historic architecture can be seen all over the countryside, and it has garnered a lot of attention from wedding planners in New Jersey, New York and Philadelphia as “rustic” weddings have become … Continue reading Pennsylvania Contractor Transforms Tobacco Barn Into Energy-Efficient Wedding Venue

REHAU RAUPEX® SPEED

REHAU’s RAUPEX® SPEED radiant overpour fastening system allows contractors to install heating pipe in overpour and concrete installations up to 30% faster. The RAUPEX SPEED O2 barrier pipe, with hook-and-loop wrap, is walked on to the RAUPEX SPEED mat without the use of specialized tools, not only saving time but also providing ergonomic advantages. The … Continue reading REHAU RAUPEX® SPEED

D.C.’s Oldest Apartment Building Restored to Former Heating Glory

Turn of the 20th Century Luxury Apartment Building Restored to Former Heating Glory Weil-McLain Atmospheric Draft Steam Boiler Key to Overhaul Built at the turn of the last century in 1901, the seven-story Mendota is Washington D.C.’s oldest intact luxury apartment building. Though much of the building had been restored over the years, one area … Continue reading D.C.’s Oldest Apartment Building Restored to Former Heating Glory

Weil-McLain Launches Advanced AquaBalance High Efficiency Combi-Boiler

Energy-efficient, reliable, space-saving unit features leading-edge condensing technology for residential applications Burr Ridge, Ill. – Weil-McLain® introduces the new AquaBalance™ combination boiler featuring leading-edge hydronic technology for smaller space residential applications. The state-of-the-art unit combines the warmth of high-efficiency space heating and the convenience of on-demand domestic hot water in a reliable, space-saving, easy-to-install package. … Continue reading Weil-McLain Launches Advanced AquaBalance High Efficiency Combi-Boiler

Clemson University’s Lee III: A teaching model for sustainable design

With all the technologies for green building today, the statement ‘A model of sustainable design’ has almost become cliché. Yet Clemson University’s Lee Hall expansion (Lee III) is actually designed to teach sustainable building design by example — literally — with an online real-time energy usage dashboard, truly making it a model for students and … Continue reading Clemson University’s Lee III: A teaching model for sustainable design

SunTouch HeatMatrix uncoupling membrane

SunTouch launched the HeatMatrix uncoupling membrane that offers a flexible, easy-to-install solution for WarmWire underfloor electric radiant heating. Heating wire in HeatMatrix may be installed horizontally or vertically, providing professional installers and DIYers a convenient way to accommodate a variety of underfloor spaces. And because HeatMatrix has less rollback memory, it lays down flatter and … Continue reading SunTouch HeatMatrix uncoupling membrane

YWCA Toronto Elm Centre project features thermally active slab design

Since opening its doors in 1873, YWCA Toronto has worked to improve the lives of women and girls by providing training, educational opportunities and housing, while advocating for systematic change. As part of this effort, the organization has recently completed construction of the YWCA Elm Centre, an $80 million, 302-unit affordable and supportive permanent housing … Continue reading YWCA Toronto Elm Centre project features thermally active slab design

Condensing boilers remedy aging medical facility’s heating system

A medical center in Chicago required a quick and efficient remedy to nurse its aging and failing boiler heating system back to good health. The newest high efficiency condensing boilers from Weil-McLain provided the medicine needed. Larry Latas, system director for multiple medical facilities in Chicago, needed to upgrade the aging boiler at the 15,000-square-foot … Continue reading Condensing boilers remedy aging medical facility’s heating system

30 yrs of Power-Fin by Lochinvar

Lochinvar Celebrates 30yrs of Power-Fin® Commercial Product Line The pioneer product of efficient heating experiences a milestone in July 2016 Tennessee-based Lochinvar, LLC is celebrating the 30th anniversary of its industry-changing Power-Fin product line this July. “As a company, we are proud to celebrate the 30th Anniversary of the Power-Fin product line.  This product line … Continue reading 30 yrs of Power-Fin by Lochinvar

Historic church sings praises of high efficiency condensing boilers

With failing boilers and an inefficient heating system, historic Zion Episcopal Church in Oconomowoc, Wis., needed guidance and help. New, high efficiency condensing boilers from Weil-McLain provided the answer to solve their heating woes. Zion Episcopal Church is a Wisconsin landmark founded more than a century and a half ago. In 1846, the Rt. Reverend … Continue reading Historic church sings praises of high efficiency condensing boilers

Reviewing the 2015 solar & hydronics code

In response to a growing interest in residential and commercial solar energy systems, IAPMO first developed and published the Uniform Solar Energy Code in 1976. Just like the 2009 and 2012 editions of this code, the 2015 Uniform Solar Energy and Hydronics code (USEHC) was developed using IAPMO’s American National Standards Institute (ANSI)-accredited open consensus … Continue reading Reviewing the 2015 solar & hydronics code

Lochinvar names latest & last winners of 2015-2016 VIP Contractor Program

Lebanon, Tenn, — Lochinvar has announced the final winners in the 2015-2016 VIP Contractor Program. The seven-month program, which culminated in April, rewarded participating contractors for their impressive installations, product registrations and overall performance throughout the heating season. Among the 14 entries posted in April’s VIP Installation Showcase, the top three submissions were selected as … Continue reading Lochinvar names latest & last winners of 2015-2016 VIP Contractor Program

Uponor’s $18M expansion provides new jobs in Apple Valley

Governor Dayton proclaims May 16 Uponor Day in Minnesota Apple Valley, MN, May 17, 2016 — Uponor North America (Uponor) held a ribbon-cutting ceremony to celebrate the official opening of the company’s ninth expansion in Apple Valley and the 11th in the greater Twin Cities area. Gov. Mark Dayton, along with several political and community … Continue reading Uponor’s $18M expansion provides new jobs in Apple Valley

Ohio commercial building boiler retrofit

Climate-Tech, Inc. is a third-generation family-owned business serving western Cuyahoga and parts of Lorain County Pennsylvania. The business was started in 1972 by John E. Dubecky (originally called Budget Air) and grew to an Angie’s List super service award-winning business for the last 13 years, specializing in indoor climate control. Currently operated by John J. … Continue reading Ohio commercial building boiler retrofit

Hydronic geothermal heat pump

WaterFurnace International, Inc., a leading manufacturer of geothermal and water source heat pumps, introduces the 5 Series 504W11 hydronic geothermal heat pump, featuring WaterFurnace’s patent-pending OptiHeat vapor injection technology. While most hydronic geothermal systems generate 130°F water, OptiHeat creates exiting water temperatures up to 150°F, thanks to an additional heat exchanger that diverts excess heat … Continue reading Hydronic geothermal heat pump

Watts opens Watts Works Learning Center

On April 20, Watts Water Technologies  announced the grand opening of the Watts Works Learning Center, a 12,000-sq.-ft. state-of-the-art facility where customers, distributors, sales representatives, and others can obtain hands-on experience with the company’s plumbing, HVAC, and water quality products and technologies. The 12,000-square-foot facility includes configurable classrooms, demonstration labs, and working mechanical rooms that … Continue reading Watts opens Watts Works Learning Center

NaviLink™ available through Navien wholesale distribution

Seen at AHR, Navien’s newest industry-first innovation, NaviLink, is now available through Navien wholesale distribution. This optional new Wi‑Fi remote control system makes it easy for commercial and residential users to communicate with their Navien systems from anywhere in the world. The NaviLink module attaches easily to all Navien water heaters and boilers (NPE series, … Continue reading NaviLink™ available through Navien wholesale distribution

Coffee with Caleffi™: Temperature regulation

A new speaker to the popular Coffee with Caleffi™ webinar series, Claudio Ardizzoia, debuts on Thursday, May 19 at 12 noon CDT discussing Super Simple and Reliable Temperature Regulation for Hydronic and DHW Systems. Ardizzoia, product marketing manager of Caleffi S.p.a., will explain the functionality of mixing valves in both plumbing and hydronic applications, investigating … Continue reading Coffee with Caleffi™: Temperature regulation

Bell & Gossett releases Q2 Little Red Schoolhouse schedule

Earn credits toward green building certification through Xylem’s industry-leading training at its Bell & Gossett Little Red Schoolhouse (LRSH). Second-quarter classes are geared toward engineers, contractors and installers in the commercial plumbing and hydronic heating and cooling industries. The LRSH’s one-of-a-kind, systems based training approach provides industry professionals with hands-on training and holistic solutions to … Continue reading Bell & Gossett releases Q2 Little Red Schoolhouse schedule

Taco’s expands iWorX building automation platform capabilities

Building owners and commercial system designers and installers now have a bigger ally in Taco. The company has broadly expanded the capabilities of its iWorX control platform to provide an updated graphical user experience.   A tablet, PC or smart phone now acts as the local control interface for monitoring, system diagnostics and the new … Continue reading Taco’s expands iWorX building automation platform capabilities

Aspen, Colorado high-end home features high-end hydronics

When the owners of a 10,000-sq.-ft. new construction high-end residential home in Aspen, Colo. was looking for a reliable company with extensive experience in hydronic heating and high-end residential plumbing, they looked no further than Top Gun Plumbing & Heating, Glenwood Springs, Colo. In addition to battling the elements, the design of the project presented … Continue reading Aspen, Colorado high-end home features high-end hydronics

Carlson-Holohan Award finds permanent home at the General Society of Mechanics and Tradesmen of the City of New York

Right across the street from the Harvard Club of New York, funded by notable members such as Andrew Carnegie, sits the General Society of Mechanics and Tradesmen of the City of New York. Founded on November 17, 1785 the aims of the General Society were to provide cultural, educational and social services to families of … Continue reading Carlson-Holohan Award finds permanent home at the General Society of Mechanics and Tradesmen of the City of New York

Caleffi releases new idronics: Water Quality in Hydronic Systems

Water is the essential fluid in all hydronic systems. Its quality affects the system’s overall efficiency, reliability, life expectancy and the effectiveness of chemical additives. The 18th edition of idronics™ discusses problems that can develop within hydronic systems when water quality is ignored. It lays our procedures for converting raw water into high quality water … Continue reading Caleffi releases new idronics: Water Quality in Hydronic Systems

Lochinvar names January VIP program winners

Lebanon, Tenn. — Lochinvar has announced its monthly VIP Contractor Program winners for January. The company rewards VIP Contractors throughout the heating season for impressive installations submitted in the VIP Installation Showcase and holds a monthly drawing for VIP Contractors who register qualified products. Of all the entries posted in January’s VIP Installation Showcase, which … Continue reading Lochinvar names January VIP program winners

Coffee with Caleffi™: Siegenthaler Examines Water Quality in Hydronic Systems

Many installers simply fill their newly installed hydronic systems with water that’s available on site. Sometimes they’re “lucky” to have water with relatively low dissolved solids, stable pH and low turbidity. Other times they may not be so lucky. Although problems may not appear right away, the life of their new system could be significantly … Continue reading Coffee with Caleffi™: Siegenthaler Examines Water Quality in Hydronic Systems

Taco introduces the Dan Holohan Comfort Award at AHR Expo

At this year’s AHR Expo, Taco CEO Johnny White Jr. presented the Dan Holohan Lifetime Contribution to Comfort Award to Dan Holohan. The award’s inaugural presentation to its namesake, Dan Holohan, was called, by White, “just one small token of appreciation for a lifetime of tireless commitment to improving the trade and — in no … Continue reading Taco introduces the Dan Holohan Comfort Award at AHR Expo

2016-2018 Carlson – Holohan Industry Award of Excellence Inductee – John Goshulak, P.Eng.

At the RPA party at this past AHR Show in Orlando, the next chapter in the Carlson-Holohan Industry Award of Excellence was revealed as John Goshulak, P.Eng., was announced the next torch bearer of said biennual award, which is bestowed upon an individual who is selfless and gives his/her time to raise the benchmark of … Continue reading 2016-2018 Carlson – Holohan Industry Award of Excellence Inductee – John Goshulak, P.Eng.

Must Own: Lessons Learned Servicing Boilers by Ray Wohlfarth

Ray Wohlfarth, international author of Lessons Learned in a Boiler Room and Lessons Learned: Connecting New Boilers to Old Pipes, has a new book on the service of hydronic and low pressure steam boilers, entitled, Lessons Learned Servicing Boilers. The book is filled with almost 300 pages of tips, rules of thumbs, formulas, and jobsite … Continue reading Must Own: Lessons Learned Servicing Boilers by Ray Wohlfarth

Product Review: Viessmann Vitocrossal (CU3) boiler

Jim Godbout Plumbing & Heating, Inc. is a very diversified company offering comfort and efficiency using geothermal systems, solar thermal sstems by and plumbing, piping and HVAC systems. Godbout provides service for the entire coastline of Maine from York to Freeport. Including: Biddeford, Saco, Kennebunk, Kennebunkport, Portland, South Portland and everywhere in between. The Hub … Continue reading Product Review: Viessmann Vitocrossal (CU3) boiler

WaterFurnace introduces HydroLogic, a simple solution for radiant heating

WaterFurnace International, Inc. introduces HydroLogic, a turnkey solution for radiant heating that integrates seamlessly into a WaterFurnace geothermal system. It is a cost-effective product that takes the complexity and time out of radiant system installations. The main component of HydroLogic is a pre-piped, pre-wired modular mechanical panel designed to simplify installation. The panel supports cooling, … Continue reading WaterFurnace introduces HydroLogic, a simple solution for radiant heating

Boiler primer: Bosch Thermotechnology Corp.

Bosch Thermotechnology is a leading source of high quality cooling and heating systems, including tankless, point-of-use and electric water heaters, floor-standing and wall-hung boilers, Bosch and FHP geothermal heat pump systems as well as controls and accessories for every product line. Bosch Thermotechnology is committed to reinventing energy efficiency by offering smart products that work … Continue reading Boiler primer: Bosch Thermotechnology Corp.

‘Caleffi Excellence’ grand prize winner announced

The year-long contest — Caleffi Excellence — which is a platform where designers and installers of hydronic or plumbing systems can showcase their work and receive national recognition, has culminated in the announcement of the grand prize winner. Bill Olschewski of Tip Top Plumbing (Manitoba, Canada) and a guest of his choice has won a … Continue reading ‘Caleffi Excellence’ grand prize winner announced

tekmar snow & ice melting app & online design tool

tekmar unveiled its new app and online tool to assist users in designing their own snow & ice melting solutions. Contractors, engineers, and distributors can use the app and online tool to enter their design parameters and instantly receive the specific information they need to specify the correct control solution, prepare a quote, and successfully … Continue reading tekmar snow & ice melting app & online design tool

Coffee with Caleffi: Boiler Component Selection

December Webinar Completes Component Selection Series In the webinar, Bob “Hot Rod” Rohr, training and education manager, completes a two-part boiler component selection series on Thursday, Dec. 17 at 12 noon CST concentrating on key components used in renewable energy hydronic systems. Please visit www.caleffi.com for registration details. The complimentary educational series, Coffee with Caleffi™, … Continue reading Coffee with Caleffi: Boiler Component Selection

Advances in boiler construction and design

Contractors, architects, engineers and others who specify commercial and industrial boilers continually seek systems that are more cost-effective, energy efficient and environmentally-friendly. The boiler industry has responded by making significant advances in both construction and design, with new systems offering greater efficiencies, cutting-edge technologies, advanced controls and the ability to integrate with renewable energy. Condensing … Continue reading Advances in boiler construction and design

Lochinvar names first 2015-2016 VIP Contractors Program winners

Lochinvar has announced the first winners in its 2015-2016 VIP Contractor Program, which offers more prizes than ever before. From October through April, a total of four VIP Contractors are rewarded each month for their installations of Lochinvar’s residential boilers. Three of the monthly winners are selected among participants in the VIP Installation Showcase, an … Continue reading Lochinvar names first 2015-2016 VIP Contractors Program winners

Solar thermal/condensing boiler project addresses multiple loads, earns energy offset

  In Eagle County, Colorado, local authorities not only promote energy sustainability, but insist on it. Any residential project that incorporates more than 200 square feet of snow melt, for example, must mitigate the load with an offset the draws upon a renewable energy source. So the county required owner to mitigate snowmelt energy draw … Continue reading Solar thermal/condensing boiler project addresses multiple loads, earns energy offset

SlimFit™ High-Efficiency Condensing Boilers

With a number of innovations, Weil-McLain® now offers an enhanced line of its popular SlimFit™ high-efficiency condensing gas boilers. New features include improved boiler-to-boiler communication, Modbus® and BACnet® for linking with BAS (building automation systems), express set up wizard, 10 preset typical heating systems, and updated controls interface for simpler navigation, at-a-glance boiler status, diagnostics … Continue reading SlimFit™ High-Efficiency Condensing Boilers

Watts Radiant’s R-flex Pre-insulated PEX Piping System

Watts Radiant’s R-flex is a pre-insulated, flexible, energy-saving PEX piping system with a durable, waterproof outer cover. It provides cost-effective distribution for heating, cooling, and snow melting applications in schools, universities, resorts, housing developments, and other residential facilities. R-flex consists of a long-lasting PEX carrier pipe or pipes surrounded by thick insulation layers, all contained … Continue reading Watts Radiant’s R-flex Pre-insulated PEX Piping System

Boiler, tankless install solves homeowner’s hot water concerns

  Sunshine Plumbing Heating Air was recently recognized as one of the fastest growing private companies in Denver since 2012 with a 534% growth rate. Susan Frew, president and William Frew, vice president, are a husband and wife powerhouse ownership team whose company just won the 2015 ‘Fastest Growing Company’ award for the Denver Business … Continue reading Boiler, tankless install solves homeowner’s hot water concerns

Caleffi DISCALDIRTMAG magnetic separation

Caleffi expands its solutions to problems caused by ferrous oxide debris within hydronic systems. Ferrous oxide debris, which is abrasive and often microscopic, is created from the oxidation of iron or steel materials. It can deposit onto heat exchanger surfaces and accumulate in other components including circulators, causing reduced thermal efficiency and premature equipment wear. … Continue reading Caleffi DISCALDIRTMAG magnetic separation

Viega provides design and product transition assistance for PEX applications

•  New Make the Switch program helps customers keep PEX installation projects on schedule. Wichita — Viega offers technical experts to assist with system design and product selection for switching to Radel® R-based PEX products. Known as a leader in press technology and training for the commercial, residential and industrial plumbing, heating and cooling industries, … Continue reading Viega provides design and product transition assistance for PEX applications