Wanna get the most-read industry news?

We will send you emails only several times per month. Isn't that cool?

Subscribe!

We will not spam you or sell your email to anyone.

IAPMO Standards Council Issues TIAs

Bulleticon

IAPMO Standards Council Issues TIAs

Ontario, Calif.  — The IAPMO Standards Council on Nov. 4 issued Tentative Interim Amendments affecting the 2009 and 2012 editions of the Uniform Plumbing Code (UPC®).

TIAs UPC-012-09 and UPC-002-12 replace code language related to lead content in piping systems used to convey potable water in order to bring the codes in line with a federal low-lead law that will take effect on Jan. 4, 2014.

The TIAs were balloted through the Plumbing Technical Committee in accordance with the Regulations Governing Committee Projects to determine if there existed the necessary three-fourths majority support on technical merit and emergency nature to establish the recommendation for issuance. The letter ballot passed
on both accounts. Further, in accordance with the Regulations, these TIAs will also apply to the 2015 edition of the UPC.

The Reduction of Lead in Drinking Water Act amends the Safe Drinking Water Act (SDWA) and sets new, lower standards for the amount of lead permissible in plumbing products coming into contact with potable water. The new law reduces the permissible levels of lead in the wetted surfaces of pipes, pipe fittings, plumbing fittings
and fixtures to a weighted average of not more than 0.25 percent. The new the law also retains the 0.20 percent lead limit for solders and flux first implemented in 1986 and stipulates a method for calculating the weighted average lead content.

To examine TIAs UPC-012-09 and UPC-002-12 in their entirety, visit http://codes.iapmo.org/docs/2012/UPC/UPC%20TIA%20012-09%20&%20002-12%20Issued.pdf.

Leave a Reply

    No Twitter Messages.