I ain’t the wolfman: John Barba sets the benchmark in contractor training

By John Mesenbrink

To say that he is good at what he does would be an understatement. John Barba, Taco’s Contractor Training & Trade Program Manager, is one of those industry “lifers” that teaches and trains as vehemently as he cares about the industry in which he “serves.” And if you meet him in person, attend one of his training sessions, or communicate with him via social media or Taco’s own “The Neighborhood,” I think you would come away with that same impression. That is why we—John and Eric—have a tremendous amount of respect for the man. Knowledge, charisma and a bit of humility are some of the driving forces that put Barba atop the training perch in our good industry.

JBTraining23bThe Early Years
Barba was introduced to the plumbing and heating industry at a very early age. Like a lot of people in our industry—in a family business—Barba’s dad, Mario, started his own plumbing and heating business in Harvard, Mass. in 1938. He had graduated from Worcester Boys Trade School in 1934, and worked for a couple of local plumbers until starting his own shop. “He’d bring me along on jobs when I was real young, about six or seven to start. He’d have me fetch wrenches or whatever else he may have needed from the truck. Dad had a crew of guys working for him, so he mostly handled the plumbing service work. It was mostly just ride-along stuff at that point—probably to get me out of my mother’s hair during school vacations,” recalls Barba.

Later, Barba remembers spending an entire school vacation one year, around the age of 13, digging trenches for soil pipe in a condo project at which they were working. “He made sure I was familiar with the business end of a shovel!” says Barba.

John’s father instilled in him lessons that often times get lost in today’s parenting landscape. “If you can work with your hands, you can always earn a good living. That wasn’t just a lesson, it was reality. The old man liked to see people work with their hands; he would always take in apprentices from the local trade schools,” continues Barba.

Says Barba, “Both my mom and dad made sure all their kids understood a few basics: be thankful for the many blessings you have, be honest, always give your best effort, don’t forget where you came from and try to have a few laughs along the way.”

Barba’s father not only ran a successful business for decades, he was a leader in the town government and in the local church. He also founded and ran a national social organization for folks whose families came from the same village in Italy, was one of the founders and leaders of the local Rotary Club, served on the board of directors for the local bank for 27 years and traveled the world after surviving colon cancer surgery in 1965. In his later years, Mario Barba became the town historian, delivered the keynote speech at his town’s 250th Anniversary celebration and inspired a one-man stage show by the great storyteller Jay O’Callahan, called “Village Heroes.”

Barba performs in front of a sold out training class at Taco’s new Innovation and Devlopment Center.
Barba performs in front of a sold out training class at Taco’s new Innovation and Development Center.

In 1969, Mario Barba was awarded a Gold Medal by the Columbus Association’s International Institution of Culture and Assistance in Trieste for “promoting collaboration among all men by means of education, science, culture and loving assistance to the poor and need without discrimination, aiming at universal peace and good will, respect for human rights and fundamental freedoms.”

Yet running the business end of the company was daunting, to say the least. Barba learned first hand how hard running a business was. Making payroll and the payroll taxes, managing and paying for insurance, finding jobs, figuring job quotes, selling the jobs, not selling the jobs, ordering material, paying for the material, deciding which bills to pay and which ones you have to let slide, chasing money, scheduling jobs, finding and keeping good help, improving that help’s skills, keeping the books straight, making sure the company has money in the bank, making unhappy customers happy, keeping happy customers happy, finding new customers, keeping old customers, dealing with a down economy, learning about new technology, “it’s a hell of a lot to have on your plate, and we haven’t even turned a wrench yet. That’s a lot of balls to keep in the air.  You either get good at juggling, or you don’t,” says Barba.

And when did Barba know it was time to take down the stakes and close shop? “When I realized I wasn’t a very good juggler. And, as a result, I have a ton of respect for the guys who sit in my classes because they’re doing something I wasn’t very good at.  Running a business can be a monumental challenge and it takes a special kind of person to do it successfully.”

(l to r) Contractors Dan Foley and John Abularrage share a laugh as Barba provides “hands-on” training.
(l to r) Contractors Dan Foley and John Abularrage share a laugh as Barba provides “hands-on” training.

Training Introduction
Barba recalls getting into training by accident, actually, in 1993 when he was working for Urell, Inc., a manufacturer’s rep in Watertown, Mass. Urell is a pretty large rep firm and, at the time, they were the rep for HeatLink radiant products. “If you liken the growth of radiant heating to the development of a child, the business was just learning to crawl.  And Heatlink, while a fantastic product, was well behind the ‘big boys’ in New England at the time – Stadler (now Viega), Heatway (now Watts Radiant) and Wirsbo (now Uponor),” says Barba.

Barba had been to a few training classes on radiant when he was working with Joe Fiedrich and Rich Trethewey at Stadler, and had installed what passed for “a lot” of radiant at the time (about a dozen jobs). Barba suggested to David Urell that maybe they could move sales a little by offering a training class on radiant. “David asked me if I had ever done a training class before.  No, but I’ve been to a bunch.  How hard could it be?’” Little did they know. Barba will be forever grateful to David Urell for that opportunity.

The first actual training class was in 1993 at Urell. They had five people at that first class, and three of them came as a personal favor. It was a full-day class, and for a first effort, in Barba’s words, it was truly awful.  “We did another one and improved to terrible. The third one advanced to pitiful and the fourth one made it all the way to just plain bad. Our ultimate goal was to just ‘not suck.’”

But they kept doing them, and more people started coming.  About this time Wirsbo was looking for a new rep in New England. Urell was the 2nd largest rep firm in New England (Emerson Swan was and still is the largest) and it was a natural fit. Uponor knew that they were doing training and armed them with a formal training package, which made it very easy. Wirsbo’s trainer at the time, Dave Laursen, was a former teacher and taught Barba about learner-focused and outcome-focused training.

Eventually, Dave was promoted to sales manager and Wirsbo was looking to replace him as a trainer.  One thing led to another and Barba was lucky enough to land there.

The Rest of the Story…
Now Barba is lead trainer at Taco, Inc., and along with David Holdorf, they both do some great things.

Here is the rest of the conversation with Barba:

MH: What was the transition like to Taco? How is it working for John White, Jr.?
Barba: The transition to Taco was very easy. The vibe at the company is very similar to late-90’s Wirsbo—a can-do kind of attitude with a commitment to strong customer relationships.

And working for Johnny White, well, it’s hard to put into words. The man’s passion for his company and his commitment to keeping 500 manufacturing jobs in Rhode Island and Massachusetts, and his commitment to the betterment of his employees’ lives, is truly inspirational. He calls Taco a “great experiment,” and the company is constantly evolving—looking for newer, better ways to do things. As an employee, that inspires and empowers you. You want to go above and beyond not just for yourself, but for your coworkers, too. We’re a relatively small, family-run company competing against billion-dollar international conglomerates, and we’re competing successfully. There’s something very American about that, and working for John is not so much about the paycheck, it is a cause; we’re succeeding because our products are innovative, our service is stellar and our programs help our customers be as successful as they want to be.

MH: Who are some of your mentors?
Barba: There’s been lots of help along the way. I was fortunate enough to work for Richard Trethewey for a year, and that exposed me to a new world of products and ideas for creating comfort. Bob Goodrich held my hand when I installed my first several radiant heating jobs. He showed me the right way to get it done and the value of personal relationships in this business.

But the day I first heard Dan Holohan speak was the day my entire life changed. He showed that there were reasons heating systems are installed the way they are, and that there’s actual math and science behind how these things work. He also showed me the value of making training interesting and fun for those poor souls who have to sit in the chair and listen to you yak all day long!

Can’t forget Dave Urell for actually letting me get in front of a group of people for the very first time, and Dave Laursen and Joe Pauley at Wirsbo. I’ve never met anyone who can hold an audience in the palm of his hand like Dave can, and Joe’s leadership and commitment to professionalism bang around in my skull pretty much every day.

MH: Which do you prefer, turning wrenches or PowerPoints? Why?
Barba: I’m 53 years old, so it’s PowerPoints all the way. I like the process of developing a training program from start to finish, and the PowerPoint is always the last thing do.  It’s a logical process—kinda like building a heating system. When you build a heating system, you don’t start with the boiler, you start with a pad of paper, a pencil and a calculator. You do the math, select the boiler, size the pipe, choose the right circulator and develop the materials list, all so you can deliver to your customer what they need and want. The last thing you do actually is install the system in someone’s house.

Developing a training program is a similar process. You start with a pad of paper, a pencil and, since there’s always math in heating, a calculator. From there you slowly and methodically build the program so that you can deliver to your customer what they need and want. The last part of the process is creating the PowerPoint.

MH: What do you think is the proper mix when giving a presentation—humor, engagement, information, etc.?
Without solid information the program is kinda useless, so you start with that. The attendee has to leave with information that can be put to use the very next day in someone’s basement. Without that, the program is a failure.

How the presenter delivers that information is the key, and how they do that is as unique as the person doing the presenting. People like to be talked with, not lectured, and they like to be an active participant, not a passive observer. There are lots of ways to make this happen—but they’re all techniques. The information is the most important part.

MH: I’ve noticed a lot of music references in your classes and/or blogs. Was there a musical influence growing up? I heard you were a DJ at one time?
Barba: That is correct. I spent several years right after college as a DJ and a radio news guy.  At the time I thought I was going to be the next Wolfman Jack or Dan Rather but I kinda hit the talent wall. It was a heck of a lot of fun, but unless you’re Howard Stern or Chuck Nowlin, it’s not terribly lucrative.

I think most people from our generation have a “soundtrack” to their lives. We were the first generation to live with transistor radios, phonographs, stereos, FM, LPs, CDs and iPods. I can clearly remember my older sister’s fixation with The Beatles, and listening to Sgt. Pepper when it first came out in 1967. Give a listen to the Beach Boys song “Add Some Music To Your Day” from 1970 to see what I mean.

I try to select music for the blog posts to help make a point, or set a theme.  Sometimes songs are chosen just for the hell of it, but that’s rock and roll, right?

MH: What do you love most about your job?
Barba: That every class, whether it’s a two-day factory class, a one-day class in the field, or a 90-minute webinar, is completely unique. Every audience is different and has its own personality, and that is so much fun to experience. People often ask me if I don’t get bored presenting the same material all the time and the answer is it’s never the same material, it’s never the same program and it’s never the same audience, so it never gets boring.  The fundamentals of hydronics don’t change.  Sure, there are new products to discuss, but the basics remain the same. The difference is that you’re sharing that information with a unique group of people every time, and each group brings something new to the table. The fun part is you never really know where each class is going to go, or how it’s going to end.

MH: What are your thoughts on the skilled trades shortage of workers entering the job market?
Barba: The numbers tell the story. A huge segment of the plumbing and heating trades is over the age of 50—with fewer wrench-turning years in front of them.  Combine that with the dwindling number of youngsters in the pipeline to replace them, and you have a potential catastrophe on your hands. There’s a lot of service and replacement work out there, and a shrinking supply of skilled people to do it.

I think programs such as mikeroweworks.com and films such as “The Tradesmen: Making an Art of Work” are shedding light on this problem, and are showing people that a life in the trades can be lucrative, and can be a fairly quick path to owning your own business without the albatross of huge college loans.  And there’s no greater satisfaction that actually building something of value with your hands.

Every time I meet someone like Anthony Tosco, a young, self-made contractor from Philly, or Andy Mickelson, a young, self-made contractor from Montana, I feel very good about the future. These guys are making their own futures, and are perfect examples of what a smart, talented and ambitious young person can achieve in this business.

MH: Big picture: you are a recipient of the Carlson/Holohan award and you are one of the most well-respected, hard working people in this industry. When you finally hang it up, how would you like to be regarded? Legacy? (Other than the guy who leaves early in the 4th quarter only to miss great NFL comebacks)
Barba: You had to bring that one up, didn’t you? Don’t think I’ll ever live that down.  And so everyone knows, yes, I did leave the December 8 game between the Patriots and Cleveland Browns with two minutes to go, with the Patriots down 12 points.  And yes, the Patriots scored two touchdowns in the final minute and held on to win the game while I was in the parking lot feeling like a total doofus.

Legacy? Please. My only marketable skill is the ability to talk non-stop for long periods of time and not get tired. It drives my wife crazy, but I’ve been lucky enough to find people who are willing to pay me for it. Otherwise I’d be working for Eric Aune, and no one wants to see that!


2 thoughts on “I ain’t the wolfman: John Barba sets the benchmark in contractor training

  1. Great article on one of the very best there is! And trust me, once you see his “training aid” on injection pumping, you will never forget it! After 24 years in the business, i still learn something new every time I rub up against J.B.

  2. Great article…Great man!!! I was invited recently to Taco for a round table on product ideas and use. We were asked to give a few minute intro about ourselves there were only about 8 of us present. My turn came and had to mention like John said about Dan H…When I went out to Wirsbo in 2001 to take a 3 day class on installation and heat loss / design it was without a doubt John Barba who blew my world of hydronic heating WIDE open! I was never fond or very good at math and he somehow erased my fears with it and showed us all how simple and important “doing the math” really is…Cudos Guys!!!

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>


Caleffi DIRTMAG®

Ferrous impurities form when iron or steel oxidizes. Abrasive and often microscopic, the impurities can deposit onto heat exchanger surfaces and accumulate in pump cavities, causing reduced thermal efficiency and premature wear.   The new Caleffi flanged DIRTMAG® is a commercial dirt separator that is especially effective at removing ferrous impurities.  As fluid enters the separator, […]


1,000 steam boilers and counting

Ron Poniatowski; philanthropist, Jets fan, dog lover, alternative rock listener and steam boiler specialist. The man knows steam boilers better than most people alive. He’s installed roughly 1,000 during his 28 years in the trade. Ron has been with Meenan Oil, in Wantagh, NY for 17 of those years. On the boiler install crew, Ron […]


Historic Providence home gets geothermal makeover

Homes on Providence’s historic East Side often come with an enviable address, lovely views and antiquated heating systems. Such was the case last year with a 12,000-sq.-ft. home on the East Side with a view overlooking the state capitol. A new buyer decided to completely renovate the home and install a new HVAC system using […]

Screen Shot 2015-05-12 at 3.43.30 PM

Caleffi Excellence Winner Announced

Determination in installing a home owner’s heating system was the key to success for Jamie Whitehead of Cooper Plumbing and Heating (Calgary, Alberta).   The installation included domestic hot water, radiant floor heat throughout the home and forced air. Caleffi’s 172 Series manifold mixing stations were used to evenly distribute temperature to the radiant floor heat […]


Senator Sheehan visits Bosch Thermotechnology

Londonderry, NH – One day after attending a bill-signing ceremony at the White House with President Obama, the Granite State’s senior Senator paid a visit to Bosch Thermotechnology on Friday, May 1st in recognition of the company’s commitment to producing energy efficient heating and cooling systems.   Her bipartisan, co-sponsored bill, the Energy Efficiency Improvement […]


Solar is still hot

How’s business? Have some electrical experience? Well, it’s a great time to be in solar. Solar is and has been the fastest growing industry in the country, and will continue to be for the foreseeable future. Why you ask? Well, we know that fossil fuels costs are at the lowest they have been for a […]

Screen Shot 2015-04-30 at 2.48.22 PM

Siegenthaler presents course on hydronic-based biomass heating systems

For Residential & Light Commercial Buildings Heatspring Learning Institute, in partnership with the Biomass Thermal Energy Council and John Siegenthaler, will soon launch a new “lite” version of their 10-week online course: Hydronic-Based Biomass Heating Systems. The new course will focus specifically on residential and light commercial building systems that use high efficiency / low […]

Screen Shot 2015-04-28 at 9.39.35 AM

Get Ready to Geo

Geothermal heating and cooling is the most efficient, earth-friendly and economical comfort technology in the world. Watch this video to see how it works! Learn more at www.GeothermalDay.com

NSC Modules Composite

Bosch Thermotechnology Introduces Intelligent Control Modules for Bosch & Buderus Boilers

Bosch Thermotechnology has introduced a New System Control (NSC) package of intelligent modules designed to control single or multiple zone systems for increased indoor comfort and greater energy savings. The NSC tightly controls energy use through two-way communications with a range of high efficiency (95% AFUE) Bosch and Buderus condensing boiler offerings: Greenstar wall-mounted and […]


REHAU launches app for radiant heating material estimates

LEESBURG, Va. —REHAU announces the launch of its new web application, REHAU Radiant Calculator, designed to provide contractors and wholesalers with a quick material estimate for different types of radiant heating installation methods.   Intended for use by hydronics experts already familiar with sizing pumps, boilers, controls and manifolds, the calculator estimates the requirements for […]


Steve Carr of SPC Plumbing & Heating wins Lochinvar March VIP

Lochinvar has announced the most recent winners in its VIP Contractor Program for the 2014-2015 heating season. Steve Carr of SPC Plumbing & Heating in Methuen, Massachusetts was named the March winner of the VIP Installation Showcase, and Rob Dahl of Total Mechanical in Oconomowoc, Wisconsin was selected in the monthly VIP drawing. Both winners […]


Bosch Greenstar gas condensing boiler

Bosch Thermotechnology’s popular wall-mounted Greenstar gas condensing boiler for residential applications is now available in a floor standing version for all eight regular (heat) and combi (heat+hot water) models: regular heat only models 57, 79, 100, 131, 151 MBH inputs and combi heat+hot water 100, 131, 151 MBH inputs. With its sleek appliance-like design and […]


Viega 2015 Radiant Training Seminars Scheduled for Washington D.C. and San Francisco

Wichita, Kan. —  Viega announces two radiant training seminars in 2015 for design-build contractors and engineers. Viega, in collaboration with the Center for the Built Environment (CBE), at University of California, Berkeley, is holding the one-day training courses, titled, “Energy and Comfort Performance of Radiant Slab Systems.” The courses are co-presented by Fred Bauman, a […]


FLIR hosts thermal imaging training conference

Wilsonville, Ore. — FLIR Systems, Inc. is proud to present InfraMation 2015 in Nashville, TN from May 12th to 14th.  Now in its 15th year, InfraMation is the world’s leading thermal imaging training conference for building, predictive maintenance, science and optical gas imaging professionals who want to gain a competitive advantage, boost their ROI, and […]

Screen Shot 2015-04-07 at 11.04.01 AM

Win Dan Holohan — for the day at least

Last year, OESP announced setting up a scholarship/grant in Dan Holohan’s name and he is helping raise money for this purpose.  Well, why not actually auction Dan off himself? According to Holohan, “This is my final year of doing seminars. My last will be at the AHR show in Orlando next January. I will be […]


Is geothermal HVAC disruptive?

  The first time I’d ever heard of a disruptive technology, it didn’t sound like good news to me. As it turns out, the term refers to a technology that changes the way we do things— usually for good.  Perhaps you’ve heard the story of buggy whips?  Not much need for them after motor vehicles came […]


Magnetic separation: A concept that will stick

The world of separation, relating to hydronics continues to evolve and expand. Most hydronic and HVAC contractors understand the importance of air and dirt separation. They understand the need to keep high performance equipment operating at peak efficiencies. A big part of that is keeping the piping and components air and dirt free. It is […]


The show that is del-ISH

The 2015 ISH Show in Frankfurt, Germany, by all accounts, did not disappoint. The show was spectacular and grandiose in size and attendance. In fact, official numbers released from the show indicate record numbers in attendance — 198,000 visitors, a new exhibitor record and a significant increase in the level of international guests.   ISH […]


Xylem’s Bell & Gossett releases Q2 Little Red Schoolhouse schedule

Morton Grove, Ill. — The second-quarter 2015 seminar schedule is now available for Bell & Gossett’s Little Red Schoolhouse in Morton Grove. The training center’s seminars provide systems design training to engineers, wholesalers and contractors in the plumbing and hydronic heating and cooling industries.   “Xylem is at the forefront of providing education to current […]

Mike Duffy and Ron Passafaro 3-23-15

ECR Intl honors Irr Supply Center 150th anniversary

North Tonawanda, N.Y. — Ron Passafaro, President and CEO of ECR International recently met with Mike Duffy, President of Irr Supply Centers, Inc. to honor Irr Supply as a Premier Partner and mark Irr’s 150th Anniversary. Irr Supply is a leading wholesale distributor of plumbing, HVAC, refrigeration and electrical products throughout New York and Pennsylvania. […]


Idaho architect office showcases ProRadiant solution

CSHQA, an award-winning design firm in Boise, Idaho, leads by example and adapts to changing practices and technologies in business, architecture and engineering. When renovating its new office, the firm decided to install radiant heating and cooling. After completing energy modeling and cost comparisons for six different systems, the team decided on the Viega ProRadiant […]


Lochinvar names February VIP winner

LEBANON, TN – March 12, 2015 – Lochinvar has named the latest winners of the VIP Installation Showcase and the VIP Drawing for the 2014-2015 heating season. Nathan White of White’s Plumbing & Heating in Kenai, Alaska was named the February winner of the VIP Installation Showcase, and Joseph DiPietro of DiPietro Heating & Cooling […]

PR - Caleffi Excellence

Caleffi Awards January Excellence Winner

Challenged by an improperly installed heating system resulting in a house that was either above 80° or below 60°F, Joseph Keyes of Heat Tek Heating and Plumbing (Johnson City, N.Y.) was tasked with solving the problem. He first separated the house into four zones. He then created a primary/secondary system using a Caleffi hydraulic separator […]


Gotta scratch that ISH

Every year, here in the U.S., we have the AHR Show, one of the largest HVACR trade shows in the world. Well, every other year, the ISH Show in Frankfurt—organized by our friends from Messe Frankfurt—is the plumbing and HVACR granddaddy of them all. This week—March 10-14—the 2015 ISH Show kicks off, featuring the latest […]


Oil to gas at Loudon Elementary: Shrinking the boilers

School budgets are a hot topic nationwide. So is school energy consumption. Loudon, New Hampshire is no exception. As the town grows, the realization that more teachers will soon be required is coupled with the need to maintain existing programs that benefit students and families.   Short of raising property taxes, there’s no simple way […]


Community college replaces old boilers with hybrid system

Washington State Community College (WSCC) is a comprehensive two-year accredited community college located in Washington County, Ohio. Established in 1971 as Washington Technical College. WSCC offers its 2,300 students more than 50 programs of study in Arts & Sciences, Health Sciences, Business, Engineering and Industrial. The building had two large, very old atmospheric water tube […]


Taco FloPro training kicks off for 2015

Taco’s popular FloPro Factory Training program will resume this year, with the first class on April 30 to May 1 to take place at Taco’s Innovation & Development Center (IDC) in Cranston, RI.   In response to requests from residential contractors and installers who have participated in Taco online training, 2015 Factory Training will focus […]


Noritz Adds EZTR40 Online Training to Noritz University

The latest online course from Noritz gives plumbing and heating contractors what they need to know to understand and install the innovative solution. Noritz America recently launched a training course for the new EZTR40 tankless water heater on its online resource for plumbing and heating contractors, Noritz University. The class is an addition to the […]

2014 Residential GLA Winner

Bosch announces 2014 Green Living Awards winners

Londonderry, N.H. — Bosch Thermotechnology Corp. has announced the winning entries in its 2nd annual Green Living Awards contest. For 2014 Bosch considered entries for commercial and residential projects using Bosch products and awarded prizes for what was judged to be the top three projects in each category. The First Place Award winners are: For Commercial […]


Viega announces vertical integration in PEX manufacturing

Wichita, Kan. — Viega announces vertical integration of its PEX tubing manufacturing process. The company’s resource consolidation includes producing resin and extruding PEX tubing, which makes Viega the only manufacturer to quality control PEX tubing from the raw-material stage through the finished product. ViegaPEX Ultra tubing, which offers the highest industry ratings for UV exposure […]

Screen Shot 2015-02-23 at 3.51.35 PM

Uponor to expand PEX pipe manufacturing facility

Uponor North America (Uponor) is expanding its manufacturing facility in Apple Valley, Minn. beginning late spring 2015, with completion expected by Dec. 1, 2015. The $18 million investment will be used toward the renovation and expansion of an additional 88,000 square feet to accommodate lean manufacturing and office space, as well as additional manufacturing equipment […]


Foley Mechanical — historic home enjoys mechanical upgrade

Located in Bethesda, Md., the Seymour Krieger House is listed on the National Register of Historic Places, and was designed in the 1950s by internationally renowned modernist architect Marcel Breuer. The house currently is owned by an architect, and he wanted to restore the mechanical system while keeping the architectural integrity of the structure intact. […]


Forget the sheep; 2015 becomes year of efficiency

2015 marks a year defined by energy efficiency with the April deadline on the NAECA water heating standards, the pump industry moving toward higher efficiencies and products reaching levels of energy standards not seen until now. NAECA standards According to Rheem, the U.S. Department of Energy (DOE), as part of the National Appliance Energy Conservation […]

Screen Shot 2015-02-19 at 9.12.46 AM

Navien wins AHR innovation award

Irvine, Calif. — Navien, Inc., located in Irvine, California, continues to receive accolades for innovative and industry-leading products by many associations and institutes, with the latest recognition by the AHR Expo for the 2015 Innovation Award in the plumbing sector. Navien’s high-efficiency premium tankless water heating and combi-boiler products have gained a strong following nationwide […]

Taco Zone Sentry, flared

Flare Zone Sentry Zone Valves

Taco’s newest Zone Sentry Zone Valve – with an inverted flare – is ideally suited to retrofit and new construction work. The zone valves improve the overall performance of any hydronic system that uses a zone valve. Uniquely, Taco’s zone valve line uses microcircuit-based logic to control a gear-driven electronic actuator that drives a ball […]

Navien CEO and VP Accept AHR 2015 Innovation Award for NPE-S Series Tankless Water Heaters  15-0127

Navien wins AHR Innovation Award

Irvine, Calif. — Navien, Inc., located in Irvine, California, continues to receive accolades for innovative and industry-leading products by many associations and institutes, with the latest recognition by the AHR Expo for the 2015 Innovation Award in the plumbing sector. Navien’s high-efficiency premium tankless water heating and combi-boiler products have gained a strong following nationwide […]

PR - Caleffi Excellence

Managing fluctuating flow rates

It was a timely boiler plant upgrade for Martha Currie Elementary School in Surrey, B.C. with the introduction of six new condensing IBC boilers. How to manage the fluctuating flow rates with multiple zones from an older design laden with equipment coils and high-flow pumps became a non-issue with the introduction of a Caleffi hydraulic […]

Viega partners with CBE at UC Berkeley

Wichita, Kan. — Viega announces its partnership with the Center for the Built Environment (CBE) at University of California, Berkeley. The association will enable CBE and Viega to work together in educating the industry on new and more efficient technologies for commercial integrated hydronics systems. CBE is a place where industry leaders and internationally recognized […]

Daikin Applied Intelligent Equipment Rooftop Photo

Integrated intelligence, communicative devices trending

This is what we know from last month’s AHR Show: according to the numbers, attendance was shattered — more than 61,000 total attendees, including 42,400 visitors, participated in the Expo. What was trending at this year’s show? Themes from the show included continued product efficiency and systems that now have intuitive communications—which were once considered […]

Taco's IDC, Leed Gold

Taco’s ID Center earns LEED Gold certification

The Taco Innovation and Development Center (IDC), which opened in mid-2012, has been awarded LEED Gold certification by the United States Green Building Council (USGBC). The 24,037-sq.-ft. facility, which houses classrooms and meeting spaces for training and educational purposes, achieved 62 points out of a total of 79 possible points for LEED Gold.     […]

Screen Shot 2015-02-04 at 9.21.31 AM

2015 AHR video recap

The 2015 AHR Show in Chicago broke attendance numbers and the exhibitors were on their “A” game. Not able to go? This video recap brings the show to life. Stay tuned for more AHR videos in our AHR video series.


John White, Jr. — The architect of a community

I noticed a slight tremble in his fingers as he raised his hand to wipe his brow. It wasn’t because he was nervous; he has conducted hundreds of press conferences throughout his career. But on the day of the announcement of Taco’s partnership with Italian manufacturer Askoll last November, Taco CEO John White’s words resonated […]

Screen Shot 2015-01-30 at 12.21.14 AM

‘National Geothermal Day’ announced at AHR

The Geothermal HVAC industry is coming together to educate consumers with a pointed campaign that will culminate in a “National Geothermal Day” proclamation on October 20th during National Energy Month. Geothermal HVAC is Solar Energy stored in the ground beneath us, and this educational campaign will enlighten consumers and school-aged youth on this truth.   […]


AHR 2015 in all of its glory — Day 1

This past week Chicago hosted the AHR Show, and the show was buzzing — great traffic and happy exhibitors  is usually a great recipe for success. The numbers are still being measured but when it is all said and done, it could be the biggest show ever. This makes sense because the underlying sentiment moving […]


Hydronics CSI winner — Nathan White

The first installment of the Hydronics CSI was won by Nathan White, Whites Plumbing & Heating, Kenai, AK. His well-thought, concise answer earned him a Lochinvar Jacket. Congratulations to Nathan. Please stay tuned for more Hydronics CSI opportunities. The Flaw: Nathan White’s response: First  let’s use a Knight Mod con boiler for this application where […]

Horizontal geo bore driller_Vermeer

Geothermal at Yellow Iron Academy — Pella, Iowa

Mindi Vanden Bosch is the Human Resources manager, and third generation family member with Vermeer, a manufacturer of agricultural and industrial equipment. Vermeer was established 1948 in Pella, Iowa by Mindi’s grandfather, Gary Vermeer. “Our credo is Build the Best, Built to Last,” noted Mindi. Today, they serve customers in more than 60 nations with […]

Nord 1

Nord Plumbing & Heating — for the love of boilers

Natick, Mass is located just 15 miles west of Boston. Settled in 1651, the old town’s history is vividly displayed through its infrastructure and architecture. After 134 years, the Bacon Free Library is still just that — a red brick beacon to education and exploration. Not far away, the Eliot Church of Natick was founded […]

Screen Shot 2015-01-05 at 10.23.21 AM

Hydronics CSI — The Answer

1) The closely spaced tee’s separating the boiler loop from the secondary loop do not isolate the differential pressure from the boiler pump. In short, the boiler pump was in series with the zone pump. 2) The boiler is a non-condensing boiler and the (typical) low-return water temperatures from the radiant floor heat would cause […]

Screen Shot 2015-01-03 at 11.32.00 AM

Time-lapse boiler install

  William Frew and Marcus Hicks of Sunshine Plumbing Heating Air, Denver, share their work in this time-lapse video of a Triangle Tube Excellence combo unit producing 3.5 gpm of domestic hot water and running base boards at 180F


Rivera Greens, New York State’s first green development, features geothermal

Natale Builders’ newest development — Rivera Greens — in Clarence, N.Y., includes 35 single-family homes built to an energy efficiency standard unparalleled in the Buffalo/Niagara region. In fact, Rivera Greens is the first certified National Association of Home Builders (NAHB) Green Standards Eco-Friendly Development in New York State. All home designs in the development are […]

Screen Shot 2014-12-28 at 10.22.29 PM

Lochinvar names November VIP winners

Lebanon, Tenn. — Lochinvar has announced the second wave of winners in its VIP Contractor Program for the 2014-2015 heating season. Jamie Whitehead of Cooper Plumbing & Heating in Calgary, Alberta, Canada was named the November winner of the VIP Installation Showcase, and Aaron Jazynka of Master Mechanical in Papillion, NE was selected in the […]

PR-Caleffi Excellence

Mission Possible: Boiler Efficiency and Protection

To repair Calvary Lutheran Church’s heating system — in a two week period of time — it would be necessary to strip out pipe layers, pumps and inefficient compression tanks. With a clean slate, the system was redesigned so that the existing distribution piping and new boilers would work in unison without air or flow […]


Newport Mansion relies on ecocirc pumps

From the outside, the 1920s villa in the seaside community of Newport, Rhode Island, appears as any other stately historic home in the neighborhood. But inside the 15,000-square-foot house, the heating system is state-of-the-art — complete with Wi-Fi and remote programming capabilities —powered by a Bell & Gossett (B&G) pump system. The old cast-iron steam […]

Viessmann PA_0010

Portsmouth Abbey School: Profile in Boiler Efficiency

Founded by the English Benedictine community in 1926, the Portsmouth Abbey School is a coeducational, 9 – 12 academy that sits on a bucolic 500-acre campus on the shores of Narragansett Bay in Rhode Island. Dedicated to the rigors of the Western intellectual tradition, the School is also a residence for its 360 students and […]


Research shows GHPs outperform VRF

• Annual Energy Use with Geothermal Heat Pumps is 44% Less than with a Variable Refrigerant Flow System Dec. 15 – Definitive scientific research has shown that a geothermal heat pump system offers far more efficiency in a large commercial building than a variable refrigerant flow system. In January 2013, the Geothermal Exchange Organization (GEO)—with […]


Taco appoints new president/COO

Cranston, RI — At company employee meetings held December 11 at Taco facilities in Cranston and Fall River, Taco President & CEO John Hazen White, Jr. introduced Wil VandeWiel as the new president & COO of Taco. As the new president & COO of Taco, Mr. VandeWiel will oversee daily operations of Taco and work […]

Navien NHB Shipping w Team Members

Navien ships wall-hung condensing boilers

Navien announced that they have started shipping the new NHB Condensing Gas Boiler Series. The NHB boilers are available in 4 sizes: NHB-55, NHB-80, NHB 110 and NHB-150 with turn-down-ratios respectively of 7:1, 10:1, 11:1, and 15:1. The noteworthy 15:1 TDR in the NHB-150 is achieved with Navien’s advanced burner system. One key component to […]

Screen Shot 2014-12-08 at 10.00.58 PM

Hydronics CSI — Can you guess the flaws?

Mechanical Hub and Lochinvar are proud to team up to bring you a new feature called “Hydronics CSI.” Hub friend Paul Rohrs, design and application specialist for Lochinvar, has produced a hydronics design with intentional flaws in it. There are multiple mistakes with this diagram and it is up to you to use your hydronics […]


US Boiler’s K2 Condensing Boiler

The new Burnham K2 condensing boiler was designed based on feedback from field professionals who were asking for an easier boiler to service and install. In addition, the combination of high efficiency, performance and high value make the K2 ideal for households that might otherwise opt for a traditional boiler.        At up to 94 percent […]


How are you venting?

Brian Fenske offers his thoughts to an article we posted: How are you venting? PVC Flues Are They Safe? More often than not the 140 degree Fahrenheit limit for Sch 40 DWV in misinterpreted and misused. The 140 degree limit is in fluid piping situations with pressure. The charts, if I recall, are 20 PSI […]


Honig Winery Barrel Room Process Hot Water — J. Peña Plumbing

J. Peña Plumbing, Napa, Calif., recently conducted a process hot water installation—for sanitation and clean-up—by installing six Navien NPE240A tankless water heaters. Owner Jose Peña and two of his techs performed the installation, serving a new building facility — the 10,000-sq.-ft. Honig Winery barrel room in Rutherford, Calif. Navien NPE240A Features: • NPE-240A • ½” […]


Reissmann Plumbing Snowmelt Driveway Installation

Hub friend Derek Moore, president, Reissmann Plumbing & Heating Inc., gives a glimpse of a recent residential snowmelt installation. This very cool time-lapse video shows the entire project from start to finish. Reissmann Plumbing & Heating, Inc., Chester, N.J., is a full service plumbing and heating company serving Morris County and the surrounding areas of […]

Screen Shot 2014-11-12 at 1.13.44 AM

Danfoss introduces OJ ETO2 snowmelt controller

The new Danfoss OJ ETO2 Snow Melt controller offers an intelligent all-in-one control solution for ice and snow melting suitable for any application which uses hydronic or electric heating, including driveways, parking lots, sidewalks, stairs, ramps, bridges, and more. Optimal operation is ensured through output control, making the system both effective and economical. ETO2 offers […]


Lochinvar recognized in AHR Innovation Awards

Lebanon, Tenn. — Lochinvar, LLC announced that its FTXL™ Fire Tube Boiler is among the products recognized in the 2015 AHR Expo Innovation Awards Competition. The awards give special recognition to exhibiting companies that have developed the most creative and useful products on the market. The FTXL Boiler was awarded Honorable Mention in the heating […]


US Patent Issued for Pro-Pal® Products

On July 8, 2014 Webstone, was issued a U.S. patent for its Pro-Pal® Primary/Secondary Purge Tee™ and Pro-Pal® Purge & Fill™ valve systems. Documentation has been filed to include worldwide patent rights for these products. Pro-Pal® Step Saving Valves for Professionals are designed to save time, eliminate components and minimize leak paths and are all […]


Kentucky’s Clark County high school uses hybrid HVAC design

The new $60-million George Rogers Clark High School’s (GRCHS) green design is helping record up to 35% less monthly utility costs while providing better indoor air quality and comfort than the 30-percent smaller conventional building it replaced. One reason for the increased efficiency is a hybrid HVAC design featuring a geothermal well field that supplies […]


Rheem graduates 5,000th tankless training participant

Montgomery, Ala. — The Rheem Water Heating Division in Montgomery, Ala., celebrated the graduation of its 5,000th Generation IIITankless Training Program professional: Ed Phillips, master plumber and owner of Ed Phillips Plumbing in College Station, Texas.   With the release of Rheem’s Generation III tankless gas products in 2010, the company updated its training programto […]

Rheem acquires CEM S.A.

Atlanta — Rheem acquired CEM S.A., a public Chilean company that manufactures and distributes tankless, solar and tank water heating products. CEM S.A. sells its products under the Splendid brand name throughout South America. Splendid is the most established water heating brand in Chile, and it is also the country’s market leader for water heating […]


AERCO to be acquired by Watts Water Technologies

Blauvelt, N.Y. — AERCO International, Inc., portfolio entity of The Riverside Company, announced that they are being acquired by Watts Water Technologies, Inc. The acquisition of AERCO is expected to close before the end of this year. The consummation of the acquisition is subject to customary closing conditions. AERCO is a leading manufacturer of a […]


EIA predicts oilheat homes to pay less for heat this winter

Prediction backed-up by both US and Global On October 7, the National Association of State Energy Officials, in partnership with the U.S. Department of Energy’s Office of Electricity Delivery and Energy Reliability and the U.S. Energy Information Administration (EIA), convened the 2014-2015 Winter Energy Outlook Conference in Washington, D.C This year’s conference included a presentation […]


Reflections on OESP’s Road Show

Oil & Energy Service Professionals Traditional Show to Return in 2015 There are three major trade shows for our industry within the Northeast, as well as several regional shows. These larger shows cover the same market, whether the emphasis is on gasoline, oil-fired appliances, or service. As a result of this, many manufacturers and attendees […]

2014 KD Navien factory 300dpi

Navien brings new boiler Series U.S., Canada

Irvine, Calif. — As Korea’s largest boiler company, exporting to more than 30 countries worldwide, KD Navien, has developed its industry leading reputation in the United States and Canada as a tankless water heater and combi-boiler company. With deep experience in the manufacturing of boilers and the largest single boiler manufacturing facility in the world, […]


Godbout Plumbing & Heating transforms YMCA mechanical room

Godbout Plumbing & Heating Inc., Biddeford, Maine, was called to the Biddeford YMCA to swap out five, eight-year-old inefficient boilers. “We pulled the five boilers in an environment they should not have been installed,” says Jim Godbout, owner. The mechanical room before the Viessmann boiler makeover. Godbout and his team installed a couple of Viessmann […]


Mickelson Plumbing & Heating Performs Condensing Add-On

Mickelson Plumbing & Heating, in Missoula, Montana was recently hired to add back-up heat to a wood-fired hydronic system serving three buildings; a home, a shop and a lodge.  The system, which draws heat from an Econoburn gasification boiler and 800-gallon buffer tank, served the family well last winter.  But in the spring of 2014, […]


WaterFurnace presents USO of Indiana with check for $35,000

WaterFurnace presents USO of Indiana with check for $35,000 Company matches proceeds from 26th Annual Supplier Golf Outing; records largest single donation to USO in state of Indiana Fort Wayne, IN – WaterFurnace International, Inc., North America’s leading manufacturer of geothermal and water source heat pumps, recently donated $35,000 to the United Service Organization (USO) […]

4300 Grey 004 MC final

Armstrong Fluid Technology’s Design Envelope Technology Now Available In Single Phase Pumps

TORONTO – To meet the need for optimum efficiency and energy savings across all building loads, Armstrong Fluid Technology has announced that its innovative Design Envelope pumps are now also available with single phase motors. Ideal for light commercial, residential and industrial applications using single phase power, the new pumps allow designers, contractors, project managers […]


Noritz EZTR40 Residential Tankless Water Heater

Noritz Unveils Breakthrough Technology with the EZTR40 Residential Tankless Water Heater Noritz America is revolutionizing the water heater industry, taking tankless-for-tank replacement installation to a new level of ease and affordability, with the new EZTR40 condensing tankless water heater for residential applications. Noritz will be showcasing the unit to contractors with the EZTR40 Roadshow, visiting […]


Taco Hot-Link® Hot Water Recirculation

Designed for systems without dedicated hot water return lines, Taco’s Hot-Link system substantially reduces the time it takes to receive hot water and can save an average family of four up to 12,000 gallons of water a year – water that typically goes down the drain while homeowners wait for hot water. The system ensures […]


Watts PEX fittings and accessories

North Andover, Mass. —  Watts unveiled its new line of large diameter lead free brass PEX fittings and accessories in 1-1/4 inch to 2 inch sizes. The line includes 1-1/4 inch to 2 inch fittings, CrimpRings, and an ASTM F1807 crimp jaw that fits most major electric or battery powered crimp tools. These fittings are […]


Bosch FHP LV heat pump

Designed specifically for the new construction and replacement/retrofit market, the small footprint LV Split System heat pump comes in 8 sizes – 1.5 through 6 tons – and permits the condensing section to be placed remotely from the air handler section, allowing the unit to be placed in locations where space is limited or where […]


Uponor PEX-a pipe support

Uponor North America (Uponor) now offers its innovative PEX-a Pipe Support in sizes up to 3½” for suspended piping applications in commercial plumbing and hydronic distribution piping systems. Uponor PEX-a Pipe Support is a galvanized steel channel that provides continuous support of PEX in suspended piping applications, enabling hanger spacing similar to that of copper […]

RPA touts upcoming ‘Boiler Talk’ episodes

Mokena, Ill. — The Radiant Professionals Alliance (RPA) is excited to announce the upcoming lineup for “Boiler Talk,” a new Internet-based talk show co-hosted by RPA Executive Director Mark Eatherton and hydronic expert Dave Yates that brings together experts and professionals from the radiant and hydronic industry to discuss trends and issues facing contractors, designers […]

AHRI Cert. Program for DX Systems

AHRI Launches Certification Program for DX-Dedicated Outdoor Air System Units Arlington, Va. — The Air-Conditioning, Heating, and Refrigeration Institute (AHRI) today announced a new certification program for DX-Dedicated Outdoor Air System Units (DOAS), which condition outdoor ventilation air independently from the building system, allowing for improved humidity levels and greater energy savings. “DOAS marks AHRI’s […]

Grundfos Tech. Institute offers online training

Downers Grove, Ill. — Grundfos Technical Institute launched a new online training website with various platform tools designed to assist professionals across numerous market segments. Targeting consulting engineers, installers, professional end users, service personnel and Grundfos channel partners, the Grundfos Technical Institute is a training series that supports Grundfos’ high-quality pumps though easy-to-access education before, […]